• Applications

  • Blog
  • The Working Theory of Steering Diode TVS

The Working Theory of Steering Diode TVS

2018/04/17

A. The type of TVS (Transient Voltage Suppressor)

TVS can be grouped into two divisions by package and internal structure: Axial Lead and SMD (Surface Mount Device). Axial Lead diodes (or SMA/SMB package type TVS) which has higher power or larger package size is usually implemented on system power supply or special I/O port with higher surge specification. Because the package size of TVS is usually very large, TVS usually has large peak pulse power. On the other hand, a SMD TVS with multiple ESD protection ports is usually implemented on small PCB (Print Circuit Board) where TVS mounted by surface mount technology on account of saving the board space. It is known as TVS Array (or ESD Suppressor Arrays). TVS Arrays with 4 to 8 ESD protection ports are commonly used for ESD protection in industry.   


TVS Array has two categories according to the I/O interface application: high parasitic capacitance (CIN > 3pF) and low parasitic capacitance (CIN < 3pF). The high parasitic capacitance of TVS Array is usually implemented on low speed I/O interface (such as the SIM card I/O interface), while the low parasitic capacitance of TVS Array is usually implemented on high speed I/O interface (such as the USB interface).


B. The working theory of Steering Diode TVS

The parasitic capacitance of an ESD protection component is determined by PN junction. The larger the size of PN junction is, the higher efficiency the ESD protection can be. But larger size of PN junction makes higher parasitic capacitance of ESD protection. For the best efficiency of ESD protection with low parasitic capacitance, the Steering Diode TVS circuit design is commonly used.   


The circuit of Steering Diode TVS is shown in the Fig. 1. It consists a clamping diode Dz (between power line and ground line), a forward diode Dp (between I/O port and power line), and a forward diode Dn (between I/O port and ground line). When a positive ESD pulse stress into the I/O port, the ESD current IESD-1 will pass through forward diode Dp and clamping diode Dz to ground. When a negative ESD pulse stress into the I/O port, the ESD current IESD-2 will pass through forward diode Dn to ground. The diode can carry higher ESD current under forward bias condition, so that the size of forward diodes of Dp and Dn can be small which makes lower parasitic capacitance. The size of the clamping diode Dz should be designed large enough to carry higher ESD current and it is unable to affect parasitic capacitance of I/O port. Therefore, an ESD protection component with low parasitic capacitance and high ESD robustness can be implemented by the Steering Diode TVS circuit.

C. Advantages of the Steering Diode TVS Array

A Steering Diode TVS Array can provide several ESD protection ports in single small chip by layout design. It has some advantages: 

1. The ESD pulse can be clamped to a small one to protect the main chip when I/O parasitic capacitance is low. 

2. It makes ESD protection layout easier by choosing a suitable package on PCB for high speed I/O connector. 

3. The production cost of Steering Diode TVS Array can be reduced by integrating several ESD protection ports in a single small chip. 

4. Some circuits of special function (such as the back-driven protection) can be integrated in a Steering Diode TVS Array chip.   


Recently, the interface specifications of high-speed data transmission, for example USB interface, are upgraded. The data rate is upgraded from 480Mbps (USB2.0) to 10Gbps (USB3.1). Most of these main chips of high-speed data transmission are manufactured by advanced CMOS process which resulted in the reduction of the ESD robustness. Steering Diode TVS Arrays can enhance the ESD robustness for main chips.   


The ESD protection circuit using Steering Diode TVS array implemented in USB 3.1 interface is shown in Fig. 2. Both of the diodes Dp and Dn are designed in a smaller size in order to make main chips work well which are not affected by higher parasitic capacitances. The ESD pulse clamped by clamping diode Dz is as small as possible to protect main chips.   


The recommend of parasitic capacitance specification of ESD protection devices for high speed I/O interfaces application is shown in the Table I. The parasitic capacitance specification of ESD protection devices varies with the data rate of high speed I/O interfaces.   


The portable (or wearable) devices is getting more and more popular because the IoT (Internet of Things) has been springing up all over the world. The distinguishing feature of the portable (or wearable) devices is thinness and compactness. Steering Diode TVS Arrays implemented in the ESD protection circuit for portable (or wearable) devices have some advantages: 


1. Smaller space for PCB layout 

The size of PCB for portable (or wearable) devices should be small enough to meet system structure design. Steering Diode TVS Arrays not only take up smaller PCB space but also provide multiple ESD protection I/O ports. 


2. Saving the production cost 

The PCB ESD protection circuit using BAV99 and Zener Diode for DVI (Digital Visual Interface) connector is shown in the Fig. 3, while the PCB ESD protection circuit using Steering Diode TVS Array for DVI is shown in the Fig. 4. From the Fig. 4, the quantities of Steering Diode TVS Array are less than the one of BAV99 and Zener Diode for DVI connector ESD protection circuit. The total amount of circuit components is reduced that can speed up assembly and save production cost when Steering Diode TVS Arrays are implemented in system ESD protection.

D. Summary

For high speed I/O interface ESD protection, the Steering Diode TVS Array is the best choice. The feature of low clamping voltage and small parasitic capacitance of Steering Diode TVS Array can enhance the ESD robustness for main chips. A Steering Diode TVS Array has some advantages: 


1. Several ESD protected I/O ports can be integrated in a single chip by layout design. 

2. It provides many types of package for high speed I/O connector ESD protection. 

3. A small package of the Steering Diode TVS Array can save PCB space, reduce amount of a system components, increase the speed of assembly and reduce the cost.

Fig. 1 The ESD protection circuit of Steering Diode TVS.


Fig. 2 The ESD protection circuit using Steering Diode TVS array implemented in USB 3.1 interface.


Fig. 3 The PCB ESD protection circuit using BAV99 and Zener Diode for DVI connector.


Fig. 4 The PCB ESD protection circuit using Steering Diode TVS Array for DVI connector.


High Speed I/O interfaces
Parasitic Capacitance Spec. of ESD Devices (typical value) 
USB 2.0
3.0pF
USB 3.0
0.5pF
USB 3.1
0.35pF
HDMI 1.4
0.6pF
HDMI 2.0
0.5pF
V-by-one
0.5pF
eSATA3
0.55pF
Thunderbolt 3
0.15pF
DisplayPort 1.3
0.45pF
LVDS
2.0pF

Tab. I The recommend of parasitic capacitance specification of ESD protection devices for high speed I/O interfaces application. 

Sign Up

Send