• Applications

  • Blog
  • Hot Plugging

Hot Plugging

2018/12/24

In many electronic products, related safety specifications have received more and more attention, such as ESD, EMI and other test specifications. The reason is that in addition to the user's requirements for the quality of electronic products, with the upgrading and diversification of the interface, the way used by consumers and use habits are also changing.   


For example, a notebook computer with several USB interfaces can be simultaneously connected to several external electronic products, HDs, flash drives, and even spare batteries. The action of users’ plugging in and out at any time while the notebook computer is in operation is called the “hot plug.”   


During hot plug, since the signal line (such as the USB cable) at the interface’s endpoint is already charged, it is like a large charged capacitor that will discharge when the machine is in contact. This phenomenon is equivalent to the ESD effect (sometimes it is more serious) which can cause serious damage to the machine. We generally call this phenomenon direct injection. Therefore, a lot of electronic products are required to have higher level of ESD tests to prevent the direct injection.    


 In concern of this phenomenon, the notebook computer design engineer will add ESD protection parts at the USB interface. In addition to affecting the speed and integrity of data transmission, the selection of different ESD solutions also have affect protection level and durability. To prevent the direct injection of ESD to IO port, the ESD protection device with lower clamping voltage (higher than VCC) is more effective.


At present, ESD protection for high speed I/O is mainly based on TVS Array. Because it is made up of integrated circuits, it is highly valued in the IT industry with high requirement on quality uniformity. With its advantages of being made in integrated circuit process and mature technologies of supporting multi-channel, it is very helpful for engineers to save space and get the PCB circuit design in a simple way.


Many internationally renowned international computer manufacturers have high requirements for ESD, especially for high-speed transmissions such as HDMI/DVI, USB 2.0, Finger print, VGA, etc., all requiring level 4, contact 8 kV, air 15 kV or higher. Over time it is discovered that, once the ESD level is raised, the ratio of RMA will be decreasing. It is undoubtedly an assurance for the IT industry with a very low gross profit already. Consumers could request those vendors to provide the proof of ESD protection specifications upon purchasing the product, to guarantee the electronic products to be more sustainable and more reliable.


Sign Up

Send